Trailer lights that won't come on are one of the most common issues trailer owners run into, and the good news is it's usually not complicated. Most of the time it's a blown fuse. After that, the next most likely culprit is a loose connection between the trailer and the towing vehicle. Here's how to work through it.
What to Check First
Start with the fuses. Most trailers run separate fuses for the left and right turn signals, the brake lights, and the running lights — so it's worth checking each one rather than assuming they're all fine because one is. A blown fuse simply needs to be replaced before anything will work. The fuse box is typically located under the vehicle or trailer hood.
If the fuses check out, move to the connector. The most common setup is a 4-way flat connector with four wires — left turn signal, right turn signal, tail lights, and brake lights. Each wire needs to be securely seated in its terminal; a loose connection here is a very common cause of intermittent or dead lights.
If the Lights Are Still Out
If fuses and connections both look fine and the lights still aren't working, the problem is most likely in the wiring itself. A trailer wiring tester is the right tool here — it'll help pinpoint exactly where the break is instead of you tracing wire by hand.
When to Call a Professional
Once you've ruled out the easy stuff and the lights are still dead, it's time to bring in someone who does this for a living. Trailer lighting and wiring problems can hide in places that are hard to access or diagnose without the right equipment, and driving around at night with non-functioning lights isn't a risk worth taking. We handle trailer lighting and wiring repair on-site — no need to get the trailer towed anywhere. Call LV Road Tec at (888) 587-3832 and we'll come to you, diagnose it properly, and get your lights working again.