September 10, 2023 · LV Road Tec Team

Trailer Landing Gear Repair in Las Vegas

Landing gear is one of those trailer parts nobody thinks about until it stops working — and then it's the only thing you're thinking about, because the trailer isn't going anywhere without it. Here's what usually causes it to fail and how we get it fixed without pulling the trailer into a shop.

Common Reasons Trailer Landing Gear Stops Working Properly

Rust, heavy use, dirt buildup, and inadequate grease are the usual culprits. Rough roads and dock impacts can bend components out of alignment over time. Eventually, that shows up as a handle that's hard to turn or a leg that won't move at all. A trailer that's stuck is bad enough — a support leg that's actually broken is a real safety hazard during loading.

Warning Signs Your Trailer Legs Need Attention

  • The trailer leans when parked or loaded
  • The handle turns but the leg doesn't move
  • The leg looks bent after contact with a dock or curb
  • The gear slips under the trailer's weight

Hard cranking, uneven height side to side, grinding noises, or a leg that drops slowly are all signs of wear building up before a complete failure. Catching it at this stage is a much easier fix than waiting for the leg to give out.

Why It's Worth Fixing Fast

A stalled trailer throws off pickup schedules, deliveries, and driver timelines — and it's a genuine safety risk during loading, parking, and yard movement. We're upfront about what's actually wrong and what it'll take to fix before we start any work, so there's no guessing about the bill.

We Come to the Trailer — No Tow Needed

This is exactly the kind of repair LV Road Tec handles on-site. We service landing gear at yards, docks, job sites, and roadside — wherever the trailer happens to be — instead of requiring you to get it towed somewhere. Call (888) 587-3832 and we'll bring the tools and parts to you.

Why Professional Repair Beats DIY Here

Landing gear is weight-bearing equipment, which makes it a bad candidate for a DIY fix. A professional repair catches hidden wear and cracks that aren't obvious from a quick look, uses the right tools so the repair doesn't create new damage, gets the correct replacement parts the first time, and verifies the trailer is actually stable before we call the job done.

Bent or Broken Gear: What Repair Looks Like

Gear that's bent from a curb, dock, or ground impact might need an alignment check, a part replacement, a grease service, or a full leg repair depending on how bad the damage is. We'll walk you through what we're seeing and what it'll take before we touch anything.

Smart Habits That Prevent the Next Breakdown

  • Grease the moving parts on a regular schedule
  • Check bolts, brackets, and alignment often
  • Clear dirt and debris off the gear components
  • Report hard cranking early, before the system locks up completely

Frequently Asked Questions

Why does trailer landing gear get stuck?

Rust, dirt, low grease, bent parts, or heavy pressure on the leg all cause sticking. Regular inspection catches most of it early.

Can a bent trailer leg be repaired?

Some bent legs can be repaired, but severely damaged parts need to be replaced outright to keep things safe and stable.

Is mobile repair available for landing gear issues?

Yes — as long as the trailer is safely accessible, we can handle it on-site, which cuts out the towing delay entirely.

When should I stop using damaged landing gear?

Stop as soon as you notice leaning, slipping, grinding, or uneven movement. Those are signs of an unsafe loading condition, not something to push through.

How can I prevent future landing gear problems?

Routine greasing, regular bolt and bracket checks, keeping debris cleared, and reporting hard cranking early all go a long way toward avoiding a full failure.

Need Help Right Now?

Call us directly — we answer 24/7 and dispatch immediately. Free estimate before any work begins.

(888) 587-3832

Broken down?

We dispatch immediately

(888) 587-3832